Standard float switch Ø12 mm

SR6K-L1-13-0-S

Part number 8611631002
  • PVC housing with POM float
  • Connection via Amphenol socket Type C16-1 (6-pin)
  • Practical: External mounting via G1.5 thread
Request now
Data sheet
Operating instructions
Technical data
Customizing
Technical drawing

This standard float switch with a Ø12 mm switching tube is designed for applications where a lightweight and media-resistant design is sufficient. The PVC housing and the POM float are suitable for neutral and water-based media. The proven reed technology operates without continuous current and enables durable and precise level detection. Vertical mounting is done externally via a G1,5 thread, while the Amphenol socket type C16-1 offers a safe and standard-compliant electrical connection.

Installation depth: L100 mm
Output type: Reed contact
Contact form: C
Operating temperature: –5 °C … +60 °C
Connection type: Amphenol socket type C16-1 (6-pin)
IP protection class: IP 65 (DIN VDE 0470 T1)
Switching capacity max.: 60 VA
Switching current max.: 1.0 A
Switching voltage max. VDC: 250 V
Continuous current max.: 2.0 A
Thread / Mounting type: G1,5
Installation: from the outside
Housing material: PVC
Float material: POM
Approval: CE
Mounting: vertical
Immersion depth float: 18 mm ±2 mm (at density 1 g/cm³)
Pressure float max.: 10 bar
Density float: 0.69 g/cm³ ±10 %

Approval

EC Conformity 2014/35/EU Low Voltage Directive

Connection head

The connection head can range from a simple cable outlet to an R2” thread.

Housing

We also carry flanges in standardized sizes, with or without housings.

Versions

Stainless steel (WNr. 1.4571), brass (WNr. 2.0321) and PVC versions

Length

Switch tube up to 1m length

Shape

Straight or curved versions

Material

The materials of the float bodies vary from PVC, PP, POM, PVDF, NBR to stainless steel, depending on the requirement.