Standard float switch Ø12 mm

SR3K-P2-13-0-S

Article number 8611332002
  • PVC housing with PP float
  • Powerful: 60 VA switching capacity
  • External mounting via G1 thread and DIN-43650 connector
Request now
Data sheet
Operating instructions
Technical data
Customizing
Technical drawing

This standard float switch with a Ø12 mm switching tube is designed for applications requiring a lightweight, corrosion-resistant design and simple external mounting. The PVC housing in combination with a PP float is suitable for neutral and slightly contaminated media. The proven reed technology enables durable and reliable level detection without continuous current. Vertical installation is carried out externally via a G1 thread and a standardized DIN-43650 connector.

Installation depth: L100 mm
Output type: Reed contact
Contact form: C
Operating temperature: –5 °C … +60 °C
Connection type: Connector DIN 43650
IP protection class: IP 65 (DIN VDE 0470 T1)
Switching capacity max.: 60 VA
Switching current max.: 1.0 A
Switching voltage max. VDC: 250 V
Continuous current max.: 2.0 A
Cable length: 1.0 m
Thread / Mounting type: G1
Installation: from the outside
Housing material: PVC
Float material: PP
Approval: CE
Mounting: vertical
Immersion depth float: 28 mm ±2 mm (at density 1 g/cm³)
Pressure float max.: 10 bar
Density float: ca. 0.60 g/cm³ ±10 %

Approval

EC Conformity 2014/35/EU Low Voltage Directive

Connection head

The connection head can range from a simple cable outlet to an R2” thread.

Housing

We also carry flanges in standardized sizes, with or without housings.

Versions

Stainless steel (WNr. 1.4571), brass (WNr. 2.0321) and PVC versions

Length

Switch tube up to 1m length

Shape

Straight or curved versions

Material

The materials of the float bodies vary from PVC, PP, POM, PVDF, NBR to stainless steel, depending on the requirement.