Standard float switch Ø12 mm

SP1N-N2-13-0-010-10

Part number 8610115021
  • Stainless steel housing and float made of 1.4571
  • Powerful: 60 VA switching capacity
  • Horizontal installation via Pg9 cable gland
Request now
Data sheet
Operating instructions
Technical data
Customizing
Technical drawing

This standard float switch with a Ø12 mm switch tube was designed for applications requiring corrosion-resistant materials and horizontal installation. The housing and float are made entirely of stainless steel 1.4571, allowing the sensor to be reliably used in industrial and pressurized liquids. The proven reed technology operates without continuous current and enables precise and durable level detection. Installation is carried out from the inside via a Pg9 cable gland and a PVC connection cable.

Installation depth: L125 mm
Output type: Reed contact
Contact form: C
Operating temperature: –5 °C … +60 °C
Connection type: Cable PVC
Cable cross-section: 4 × 0.5 mm²
IP protection class: IP 65 (DIN VDE 0470 T1)
Switching capacity max.: 60 VA
Switching current max.: 1.0 A
Switching voltage max. VDC: 250 V
Continuous current max.: 2.0 A
Cable length: 1.0 m
Thread / Mounting type: Pg9
Installation: from the inside
Housing material: 1.4571
Float material: 1.4571
Approval: CE
Mounting: horizontal
Immersion depth float: 32 mm ±2 mm (at density 1 g/cm³)
Pressure float max.: 25 bar
Density float: approx. 0.69 g/cm³ ±10 %

Approval

EC Conformity 2014/35/EU Low Voltage Directive

Connection head

The connection head can range from a simple cable outlet to an R2” thread.

Housing

We also carry flanges in standardized sizes, with or without housings.

Versions

Stainless steel (WNr. 1.4571), brass (WNr. 2.0321) and PVC versions

Length

Switch tube up to 1m length

Shape

Straight or curved versions

Material

The materials of the float bodies vary from PVC, PP, POM, PVDF, NBR to stainless steel, depending on the requirement.