Miniature Float Switch 8 mm

MP1P-P1-15-0-010

Article number 8690141023
  • Chemical resistance: PP float and housing for media with increased stress
  • Compact: 8 mm miniature switching tube for very tight installations

  • Variable: Contact form A or B can be implemented by rotating the float

Request now
Data sheet
Operating instructions
Technical data
Customizing
Technical drawing

The miniature float switches of the MP1P series combine an 8 mm switch tube with a chemical-resistant PP float. Due to the lower density of the float body, the sensor is particularly suitable for applications in low-density media. The reed technology enables reliable, low-wear level detection without continuous current. Installation is carried out via an internal PG7 screw connection, allowing for a compact, clean, and tight installation.

Installation depth: L40 mm
Output type: Reed contact
Contact form: A or B
Operating temperature: –5 °C … +60 °C
Connection type: Cable PVC
Cable cross-section: 2 × 0.34 mm²
IP protection class: IP 65 (DIN VDE 0470 T1)
Max. switching capacity: 10 VA
Max. switching current: 0.5 A
Max. switching voltage VDC: 230 V
Max. continuous current: 1.0 A
Cable length: 1.0 m
Thread / Mounting type: PG7
Installation: from the inside
Housing material: PP
Float material: PP
Approval: CE
Mounting: vertical
Immersion depth float: 12 mm ±2 mm (at density 1 g/cm³)
Max. float pressure: 5 bar
Float density: approx. 0.54 g/cm³ ±10 %

Approval

EC Conformity 2014/35/EU Low Voltage Directive

Connection head

The connection head can range from a simple cable outlet to an R2” thread.

Housing

We also carry flanges in standardized sizes, with or without housings.

Versions

Stainless steel (WNr. 1.4571), brass (WNr. 2.0321) and PVC versions

Length

Switch tube up to 1m length

Shape

Straight or curved versions

Material

The materials of the float bodies vary from PVC, PP, POM, PVDF, NBR to stainless steel, depending on the requirement.