Standard float switch Ø12 mm

SP1N-L1-13-0-010

Article number 8610111020
  • Stainless steel housing 1.4571 with POM float
  • Powerful: 60 VA switching capacity
  • Internal mounting via Pg9 cable gland
Request now
Data sheet
Operating instructions
Technical data
Customizing
Technical drawing

This standard float switch with a Ø12 mm switching tube is suitable for applications requiring corrosion-resistant materials and reliable switching points. The 1.4571 stainless steel housing ensures high resistance in industrial fluids, while the POM float is ideal for clean, neutral media. The proven reed technology operates without continuous current and enables precise and durable level detection. Installation is carried out from the inside via a Pg9 cable gland, complemented by a PVC connection cable.

Installation depth: L100 mm
Output type: Reed contact
Contact form: C
Operating temperature: –5 °C … +60 °C
Connection type: Cable PVC
Cable cross-section: 4 × 0.5 mm²
IP protection class: IP 65 (DIN VDE 0470 T1)
Switching capacity max.: 60 VA
Switching current max.: 1.0 A
Switching voltage max. VDC: 250 V
Continuous current max.: 2.0 A
Cable length: 1.0 m
Thread / Mounting type: Pg9
Installation: from the inside
Housing material: 1.4571
Float material: POM
Approval: CE
Mounting: vertical
Immersion depth float: 18 mm ±2 mm (at density 1 g/cm³)
Pressure float max.: 10 bar
Density float: approx. 0.69 g/cm³ ±10 %

Approval

EC Conformity 2014/35/EU Low Voltage Directive

Connection head

The connection head can range from a simple cable outlet to an R2” thread.

Housing

We also carry flanges in standardized sizes, with or without housings.

Versions

Stainless steel (WNr. 1.4571), brass (WNr. 2.0321) and PVC versions

Length

Switch tube up to 1m length

Shape

Straight or curved versions

Material

The materials of the float bodies vary from PVC, PP, POM, PVDF, NBR to stainless steel, depending on the requirement.