Standard float switch Ø12 mm

SR4N-N3-13-0-G

Part number 8611416009
  • Robust: Stainless steel housing and float made of 1.4571
  • Suitable for operating pressures up to 25 bar
  • External mounting via G2 thread
Request now
Data sheet
Operating instructions
Technical data
Customizing
Technical drawing

This standard float switch with a Ø12 mm switch tube is designed for industrial applications where corrosion-resistant materials and increased operating pressures are required. The housing and float are made entirely of stainless steel 1.4571, allowing the sensor to operate reliably in aggressive or pressurized liquids. The proven reed technology operates without continuous current and enables durable and precise level detection. Vertical installation is performed externally via a G2 thread.

Installation depth: L100 mm
Output type: Reed contact
Contact form: C
Operating temperature: –5 °C … +60 °C
Connection type: Housing
IP protection class: IP 65 (DIN VDE 0470 T1)
Switching capacity max.: 60 VA
Switching current max.: 1.0 A
Switching voltage max. VDC: 250 V
Continuous current max.: 2.0 A
Thread / Mounting type: G2
Installation: from the outside
Housing material: 1.4571
Float material: 1.4571
Approval: CE
Mounting: vertical
Float immersion depth: 34 mm ±2 mm (at density 1 g/cm³)
Pressure float max.: 25 bar
Float density: approx. 0.53 g/cm³ ±10%

Approval

EC Conformity 2014/35/EU Low Voltage Directive

Connection head

The connection head can range from a simple cable outlet to an R2” thread.

Housing

We also carry flanges in standardized sizes, with or without housings.

Versions

Stainless steel (WNr. 1.4571), brass (WNr. 2.0321) and PVC versions

Length

Switch tube up to 1m length

Shape

Straight or curved versions

Material

The materials of the float bodies vary from PVC, PP, POM, PVDF, NBR to stainless steel, depending on the requirement.